THD37300H

The Simpson Strong-Tie THD37300H 3/8-inch Titanium Coated Cor-Galville Screw Anchor is a versatile and reliable fastening solution for securing structures to concrete or masonry. With a 3/8-inch thread size, these anchors are suitable for use with a wide range of fasteners, including bolts and lag screws, making them an excellent choice for various construction projects.

Each anchor in this pack of 50 is made of high-strength Cor-Galv steel, providing superior corrosion resistance. The anchor body also features a titanium coating, which offers enhanced resistance to galvanic corrosion, making it suitable for use in marine and other harsh environments. The Use Grade 3 screw thread conforms to ASTM F1570 standard.

Each anchor comes with a built-in neoprene washer, which helps to ensure a watertight seal and protect the concrete from damage during installation. It's Important to note that the washer should not be removed once installed. A design feature called the "Dual Grip Technology" provides increased holding power, helping to ensure that the anchor remains securely in place, even under heavy loads.

These anchors can be used to install structures such as handrails, guardrails, decking, and other applications where securing to concrete or masonry is necessary. They can be used in both new construction and retrofit projects, making them a valuable addition to any construction toolkit.

To install the anchor, simply drill a hole in the concrete or masonry and insert the anchor through the hole. Tighten the nut on the other end of the anchor shaft until the anchor is securely seated in the concrete. Then, thread the fastener into the anchor, tightening it to the appropriate torque specification. With proper installation, these anchors can support loads up to 1250 lbs per anchor.

These anchors meet or exceed the requirements of various building codes, including the International Building Code (IBC), the National Electrical Code (NEC), and the American Concrete Institute (ACI) 318-14 Building Code Requirements for Structural Concrete. Additionally, they conform to the relevant ANSI/ASME A112.3 standard, ensuring compliance with industry standards.

In conclusion, the Simpson Strong-Tie THD37300H 3/8-inch Titanium Coated Cor-Galville Screw Anchor is a high-performing, versatile, and corrosion-resistant solution for securing structures to concrete or masonry. Its Dual Grip Technology provides increased holding power, and it meets or exceeds relevant industry standards. With a pack of 50 anchors, this product offers great value for construction projects that demand a reliable and durable anchoring solution.

title: Pros and Cons of Buying Simpson Strong-Tie Titen SC Tower Anchors (THD37300H, 3/8" Titanium Coated Screw, 50/pk)

* **Superior Strength:** These anchors are designed to provide high-strength connections, with a maximum bearing capacity of 5,300 lbs for a single anchor in concrete and 7,500 lbs in masonry.

* **Titanium Coating:** The titanium coating on these anchors protects them from corrosion, making them an ideal choice for outdoor applications and environments where exposure to water, salt spray, or other corrosive agents is a concern.

* **Easy Installation:** The Titen SC anchors feature a unique thread design that makes them easy to install, even in challenging situations. They don't require the use of grout or special tools for installation in concrete, and they can be used in masonry with the appropriate drill bit.

* **Versatile:** These anchors can be used for a wide range of applications, including decking, structural framing, and fence installations.

* **Cost-Effective:** The 50-piece pack size makes these anchors a cost-effective choice for larger projects.

* **Price:** While the Titen SC anchors offer many advantages, they tend to be more expensive than traditional concrete anchor types. However, considering their superior strength and corrosion resistance, the price premium may be justifiable for projects that require those features.

* **Installation Depth:** The Titen SC anchors may not be suitable for projects where deep concrete embedment is required, as their maximum embedment depth is around 3 inches.

The Simpson Strong-Tie Titen SC Tower Anchors (THD37300H, 3/8" Titanium Coated Screw, 50/pk) offer several significant advantages, including their superior strength, corrosion resistance, easy installation, and versatility. These advantages come at a premium price, but for projects where those features are essential, the Titen SC anchors represent a sound investment. Overall, their unique benefits make them an excellent choice for various applications where strength, durability, and ease of installation are critical factors.

Details:

Simpson THD37300H 3/8 x 3 titen hd heavy duty screw anchor 50/pk.

specifications gotfastener:

• brand: Simpson Anchors
• mpn: Thd37300h
• upc: 707392116813

payments gotfastener:

• wallet: google-pay
• other
• credit card: discover

shipping gotfastener:

• transit: 5-11 days
• service: usps ground advantage
• type: calculated
• carrier: usps
• class: standard

general gotfastener:

• category: Business & Industrial > Fasteners Hardware

returns gotfastener:

• policy: returns accepted
• method: money back
• paid by: buyer
• time: 30 days

offer gotfastener:

• availability: in stock
• prices: $19.99–$1303.88
• item condition:
  • New
  • New – Open box
• sold #: 25
• started: january 5, 2025
• in stock #: 5
• options: ship-to-home

seller gotfastener:

• city: herriman, utah
• rating: 100.0%
• # reviews: 694

Similar To:

• T10HPTD1: RING, Simpson Strong Tie
• STB2-37500: , Simpson Strong Tie
• T15N125SFN: , Simpson Strong Tie
• S11A300P31: , Simpson Strong Tie
• T10FNB: , Simpson Strong Tie
• TNT18234HC8: , Simpson Strong Tie
• LUS26Z: HANGER, Simpson Strong Tie
• APVB88: , Simpson Strong Tie
• 5016917: , Simpson Strong Tie
• TNT25214TF: HEAD, Simpson Strong Tie
• 707392477488: , Simpson Strong Tie